MG-CLS - SYSTEM FOR CAST LEAD STRIP
The MG-CLS is optimized for TBS strip casting machines. It allows you to take in-line measurements without stopping or slowing your lines, while protecting your operators by reducing time spent near hazardous moving lead strips.
Virtual micrometer - track the full strip profile
The design allows you to measure strip thickness at multiple locations at once - giving you the full view of your strip profile.
Customizable settings leverage the familiar features of traditional micrometer but faster, more configurable and more accurate.


Technical specifications
Features
- Average Thickness Display
- Gauge and Go Scanning Modes
- Product Recipes (Nominal Thickness, Warning and Actions Limits)
- Data logging
- Closed Loop Slitter Control
- Temperature Fluctuation Control
- PLC and API Communications Options
- Lens Cleaning Alarms
- Calibration Standard
Included in the package
- 2 Laser Sensors
- Linear Motor Actuator
- Computing Platform and Touchscreen interface
- Temperature Controlled Sensors
Specifications
- 0.5 micron resolution [0.00002 in.]
- 2 micron accuracy (typical) [0.00008 in]
- 458 mm stroke [18 in]
- 150 mm per second Scanning Speed (adjustable) [6 inches per second]
- 0 to 8 mm Thickness Range (typical) [0 to 0.32 in]
- 1 to 5 KHz Measurement Frequency
Dimensions
- 740 x 530 x 210 mm [29 x 20 x 8 in]
- 38 kg [84 lbs]
Supply Requirements
- Power supply input: 100-240 VAC, 50-60 Hz, 2.2-4.4 A
- Air: 12 CFM @ 90-110 PSI
Environmental
- 10oC to 50oC operating temperature [50oF to 120oF]
- Humidity <90%
Discover related products:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.